Form Center

By signing in or creating an account, some fields will auto-populate with your information and your submitted forms will be saved and accessible to you.

Hydrant Meter Permit Application

    A deposit of $1,500 is required to reserve a hydrant meter and backflow preventer. You may submit payment by credit card at the bottom of this form. The permit holder may use the fire hydrant at the above location only. Hydrant user must carry the permit while using the hydrant and will be subject to prosecution if using fire hydrants not listed in permit. Any remaining deposit amount will be refunded after the hydrant meter and backflow preventer are returned and invoiced. Do not use water without properly setting hydrant meter and back flow preventer. It is unlawful to use unmetered water.
  2. Hydrant Meter Deposit
    Hydrant Meter Deposit
  3. Price
  4. Service Charge
    Minimum charge $50.00 (up to 30 days) then 30+ days $198.00 per quarter (90 days)
  5. Water Volume Charge
    $2.58 per CCF
  6. Hydrant Wrench Replacement
    $50.00 Each
  7. Back Flow Preventer Replacement
    $1,000 Each
  8. Hydrant Meter Replacement
  9. Enter approximate return date
  10. Do you need a hydrant wrench?
    Water may be drawn from fire hydrants for construction or other approved uses only through meters issued by the West Allis Water Utility. The City of West Allis requires all hydrant meters to be used with the back flow preventer provided. The back flow preventer must be braced in a manner that does not damage the hydrant and/or hydrant meter. Hydrant use is restricted to those hydrants which are located immediately adjacent to a construction site or other location of use (as identified in the “Fire Hydrant Permit Application:”). Hydrants and meter will be used as follows: 1. Turn hydrant full on 2. Turn meter valve on 3. When done, turn meter valve off 4. Turn off hydrant slowly 5. Remove meter from hydrant at the end of the day and store in a secure location Failure to follow this procedure could result in broken or stolen equipment and/or water mains. Repair/replacement expenses will be charged to the permit holder. Permit holder is responsible for any damages to the fire hydrant, hydrant meter and/or back flow preventer if not installed correctly, not braced correctly, or if mishandled in any way. Water drawn from hydrants may not be transported for use outside the City of West Allis. Any meter used for this purpose will be immediately removed by the Utility. No person shall use or attach any device on a hydrant unless that person has an authorized meter in use at the site, is familiar with proper hydrant operation, and is equipped with appropriate tools (fittings and hydrant wrench) to prevent damage to the hydrant. During the months of freezing weather, the permit holder must report meter use to the Utility. Meters used on hydrants must be removed daily, carefully drained and stored to prevent damage by freezing. These procedures are required to ensure operable condition of all hydrants in the case of fire. Hydrant billing is performed after hydrant is returned to the Utility. If they meter is used longer than 90 days, the West Allis Water Utility may bill for use prior to returning meter. The remaining usage will be billed after the meter is returned to the Utility. Any person or firm found in violation of these rules will be billed by the West Allis Water Utility based on time and materials at current authorized rates for inspecting and repairing the hydrant. Any damages to the West Allis Water Utility facilities and/or equipment in coordination with the permit use are the responsibility of the permit holder and the permit holder will be charged accordingly. The deposit paid when the meter is taken out may be applied to any charges incurred in conjunction with this permit. After return of the meter, the Utility will use the deposit for any outstanding amounts due, and return the remainder to the permit holder. Meters must be returned to the West Allis Water Utility at 6300 W. McGeoch Ave, West Allis, WI 53219.
  12. Leave This Blank: